FIELD CHEMICAL / PAM REV. 2026
Gongyi Xinqi Polymer Co., Ltd.Oilfield PolyacrylamideAPPLICATION DOSSIERSSEND OPERATING DATA →
PURCHASE FILE 01 / EOR grade and injection qualification

HPAM for Polymer Flooding: Write a Testable Purchase Specification

Specify HPAM for EOR with a defined brine, viscosity method, preparation, filtration and sample identity instead of molecular weight alone.

WATER
actual analysis
DUTY
defined function
EVIDENCE
measured result
Oilfield polyacrylamide viscosity brine-compatibility and filtration tests
PURCHASE FILE 01 / EOR grade and injection qualification

Published · Updated · Gongyi Xinqi Polymer Co., Ltd.

FIELD INDEX01Separate product descriptors from field acceptance02Make the viscosity requirement reproducible03Keep filterability and reservoir qualification separate04Request a code-linked evidence package05Related qualification and order decisions
01

Separate product descriptors from field acceptance

An HPAM request based only on molecular weight and hydrolysis leaves the application largely undefined. Ask how those descriptors are measured, whether the numbers are typical values or shipment limits, and which production code is being proposed. Similar catalogue values do not establish equal behavior in injection water.

Write the intended mobility-control duty beside the chemical description. Include the operator's target solution response and the actual water, preparation and equipment route. Keep uncertain laboratory descriptors visible as qualification questions rather than converting them into unverified acceptance tolerances.

02

Make the viscosity requirement reproducible

State concentration and its basis, brine recipe or analysis, temperature, hydration time, instrument geometry and shear rate. Specify whether acceptance concerns freshly prepared solution, an aged sample or material after a representative transfer route. A viscosity figure without these conditions cannot be reproduced by receiving or compared across suppliers.

Retain a reference candidate and raw readings. Resolve differences in concentration units and active-content basis before testing a cheaper offer. The procurement record should explain which measurement controls acceptance and which supplementary readings help diagnose preparation or handling effects.

03

Keep filterability and reservoir qualification separate

Require the project filtration method and cleanliness observations alongside viscosity. Record filter type, procedure, pressure history and test timing rather than treating the phrase good filter ratio as a specification. A viscous solution containing undissolved material is not an acceptable result merely because its rheology passes.

Laboratory membrane passage is a screening result, not proof of reservoir injectivity. The operator's technical team defines the additional core, rock-interaction or field evidence required for the reservoir. Do not purchase a claimed universal injection grade on the strength of one convenient water test.

04

Request a code-linked evidence package

Send the supplier the brine window, preparation limits, measurement methods and staged qualification plan. Request a small coded sample set with current product documents and clear reasons for each proposal. Identify whether commercial availability, packaging and required documentary evidence have actually been confirmed.

Link sample, laboratory result, quotation and production identity before release. State which water, reservoir or equipment changes require another review and who can accept a proposed substitution. The resulting specification should describe a demonstrated operating envelope, not imply guaranteed recovery or performance outside the test conditions.

05

Related qualification and order decisions

Keep the corresponding operating test record with the purchase evidence. Further checks include HPAM Filterability in a Purchase Specification: Define the Method and Oilfield Polymer Equivalent Offers: Verify the Replacement Instead of the Label.

Request a coded sample or a bounded trial quotation through the oilfield polymer operating brief. Include the duty, actual water or formulation, preparation limits, acceptance method, quantity and destination; distinguish demonstrated results from conditions still awaiting qualification.

WhatsAppEmail