FIELD CHEMICAL / PAM REV. 2026
Gongyi Xinqi Polymer Co., Ltd.Oilfield PolyacrylamideAPPLICATION DOSSIERSSEND OPERATING DATA →
PURCHASE FILE 08 / EOR grade and injection qualification

EOR Polymer Samples for Core Testing: Separate Screening from Supply Release

Plan traceable polymer samples for operator-defined core qualification, with water, preparation, rock context and clear limits on supply approval.

WATER
actual analysis
DUTY
defined function
EVIDENCE
measured result
Polymer flooding injection pumps filters tanks and wellhead manifold
PURCHASE FILE 08 / EOR grade and injection qualification

Published · Updated · Gongyi Xinqi Polymer Co., Ltd.

FIELD INDEX01Let the reservoir question define the test02Prepare enough traceable material for the protocol03Retain the complete response, not one favorable number04Create explicit release stages05Related qualification and order decisions
01

Let the reservoir question define the test

Core qualification is not a generic demonstration that every viscous polymer can be injected. The operator's reservoir team should define the rock representation, fluids, sequence, measurements and acceptance questions. Distinguish solution screening from the work needed to assess interaction with the specific formation.

A supplier can propose a reasoned shortlist but should not replace project design with a universal core-test promise. Record limitations of available rock and fluid samples before assigning a result to the reservoir. These limitations matter when purchasing decides whether a candidate is ready for a field trial or still needs investigation.

02

Prepare enough traceable material for the protocol

Link each sample to a product code, lot, preparation method and documented concentration basis. Confirm required solution volumes, apparatus hold-up, controls and repeats with the laboratory rather than guessing a bag quantity. Retain reference material where practical so an unexpected result can be investigated using the same identity.

Use the agreed water and filtration history and record any departure. A specially clarified laboratory sample must not be represented as proof that the field make-down system delivers equivalent fluid. Keep raw solution checks with the core record so preparation effects remain distinguishable from rock response.

03

Retain the complete response, not one favorable number

The approved protocol may examine pressure behavior, fluid propagation, retention and other reservoir-relevant outcomes. Preserve the full observations, baseline and measurement assumptions rather than selecting a single favorable end point for the purchase file. An unexplained change should trigger interpretation by the responsible technical team.

Laboratory results do not authorize operating pressure, injection rate or well changes. Those remain subject to the operator's engineering and operating controls. A favorable core screen can advance a candidate, but it does not establish guaranteed field injectivity or an oil-recovery outcome.

04

Create explicit release stages

Separate laboratory sample acceptance, pilot material release and routine supply approval. Identify the evidence and authorization needed at each stage, including production-lot traceability and receiving checks. This allows purchasing to order a bounded quantity without implying that every technical question has already been closed.

Request documents and a quotation tied to the tested code and commercial form. Re-evaluate proposed substitutions or material preparation changes before relying on the original core evidence. Clear staging protects both the trial budget and the integrity of the reservoir qualification record.

05

Related qualification and order decisions

Keep the corresponding operating test record with the purchase evidence. Further checks include HPAM Filterability in a Purchase Specification: Define the Method and Oilfield Polymer Pilot Orders: Calculate Quantity for Valid Trial Periods.

Request a coded sample or a bounded trial quotation through the oilfield polymer operating brief. Include the duty, actual water or formulation, preparation limits, acceptance method, quantity and destination; distinguish demonstrated results from conditions still awaiting qualification.

WhatsAppEmail